Ion Stroescu was born in Ploiești on 13 August 1888. He studied primary and high school in Ploiești, then he became a sports teacher at the Central School of Gymnastics in Bucharest. Very early in his youth he became addicted to aviation, especially for aerodynamics. In 1910 he founded an association of aeronautical constructions, where the photo below was taken:
Ion Stroescu, Nicolae Tănase, Coreneliu Marinescu and Tache Brumărescu at 1910, in the new association for promoting the aeronautical constructions (photo: Dan Antoniu).
In 1925 he published an important book on aerodynamics, New Perspectives in Airplane Aerodynamics. The book was handwritten, and reproduced by lithography. In 2013, INCAS published it in facsimile and thus it has been preserved. The depth of the analysis of the physical phenomena indicate a fascinating intuition for aerodynamics.
In the same year, he applies for two valuable patents, for controlling the boundary layer by injection-suction and blowing-out (patents 11.169/1925 and 13.677/1925 Ion Stroescu).
He built his first wind tunnel in 1927 at Râmnicu Sărat, in the sports room of the high school he was teaching.
Illustrations show the blue prints of the Wind Tunnel in Râmnicu Sărat and photos during construction.
The new Wind Tunnel attracted Prof. Elie Carafoli’s attention, the well known Romanian aerodynamics expert, the founder of the aeronautical engineering school. He tried to stop the demolition of the tunnel, ordered by the Ministry because it ”abusively” occupied the sports room. He did not managed that, but managed instead to get an order for Ion Stroescu to be assigned at the Politechnical School.
In 1929 Carafoli appointed Stroescu as assistant professor at the Department of Aerodyanmics. Under his supervision, Ion Stroescu designed and managed the works for the new Wind Tunnel of Polizu.
In the experimental section of the tunnel, the models of all Romanian airplanes were to be tested. The room was equipped with an aerodynamic strain cage, another invention, which demonstrate the creativity of the Romanian pioneers of aerodynamics.
On 7 May 1931, King Carol the 2nd, together with Prince Nicolae, with Prime Minister Nicolae Iorga and with the Rector of the Politechnical School, Nicolae Vasilescu-Karpen inaugurate the most important Wind Tunnel in South-East Europe, and one of the most advanced and well equipped in Europe at the time.
We may easily recognize the ”Grand Amphitheatre of the School”, currently known as the F024 Acad. Virgiliu N. Constantinescu Amphitheatre of the Faculty of Aerospace Engineering. The Wind Tunnel in Polizu contributed to the relative superiority of the Romanian aeronautical industry before and during WWII. Hundreds of new aircraft designs, wing airfoils and other parts could be tested. Some of the aircraft designed in this Wind Tunnel were matching the performance at the highest standards worldwide, competing with American, British or German aircraft.
In 1937 Ion Stroescu got another assignment, with the Faculty of Sciences of the University of Bucharest, by the Laboratory of Prof. Victor Vâlcovici, who was PhD in aerodynamics from the school of the well known scientist Ludwig Prandtl (1931).
Ludwig Prandtl visited the Politechnical School in 1941, particularly to see the Wind Tunnel in Polizu. In the picture, from left to right: C.C. Teodorescu, Elie Carafoli, Ludwig Prandtl, Dionisie Germani, Victor Vâlcovici, Lucius Saveanu, Ion Cârstoiu and Nicolae Tipei.
On the stairs of the tunnel, in this photo there are C. C. Teodorescu, Ludwig Prandtl and Dionisie Germani.
The experimental results at the end of an intense effort under the supervision of Prof. Vâlcovici, and later (after 1941) with the participation of the young mathematician Ion Șabac, the Wind Tunnel in Polizu and its creator Stroescu get an international recognition.
In 1943, Ion Stroescu’s presentation at the Research Academy in Berlin attracted appreciative remarks by Professors Ludwig Prandtl and A. Betz.
In 1946 at the Fourth Congress of Applied Mechanics, Ion Stroescu presents at Sorbone the paper “A New Type of Wind Tunnel”.
“Prof. Edmond Brun requested permission to use the blue prints of the Bucharest Wind Tunnel to build a similar one at Sorbone” (Prof. V. Vâlcovici).
Ion Stroescu stayed in France for 14 months, where he designed a special icing wind tunnel at Bellevue (ONERA).
Wind Tunnel ONERA of Bellevue, France, designed by Ion Stroescu
In 1948, Ion Stroescu returned to Romania and worked at the Institute of Applied Mechanics of the Academy. In this capacity, he designs and builds the subsonic wind tunnel of the Militari Platform (INCAS).
In 1960, Ion Stroescu was celebrated for the 70th anniversary and for 50 years of activity in aeronautics, at the Romanian Academy, by Acad. Elie Carafoli, Acad. Victor Vâlcovici, Acad. Dumitru Dumitrescu and Prof. Nicolae Tipei. On the occasion, he was recognized as an inventor and pioneer in experimental aerodynamics, as the leader of the Romanian aerodynamics.
Ion Stroescu died in 1961.
(This article was adapted after the presentations of Prof. Sterian Dănăilă, using original materials of the ”Elie Carafoli” Department of Aerospace Sciences, and using the paper of Conf. Nicolae Șerban Tomescu, ”An important achievement of Professor Ion Stroescu: the wind tunnel of the Polytechnic School of Bucharest” published in 2011 in the INCAS Bulletin. Another reference is the paper of Buiu V, Ion Stroescu (1888-1961) A Man and a Life –for a passion, INCAS BULLETIN, Volume 3, Special Issue/ 2011, pp. 1 – 15. A significant reference over the entire field is the book ”The History of the Higher Education in Aviation” by Prof. Virgil Stanciu)
Jeppesen FIA RAS Contest
As Mr. Sacha Neusser (Jeppesen) and Sorin Roșca, MAEng (RAS) announced on the floor of the Opening of the University Year, we publish <here> the details of the Jeppesen - Faculty of Aerospace Engineering - Regional Air Services contest aimed at faculty students...
Opening 2017
In the Radu Voinea AN010 amphitheater on 25 September 2017, 10 am, the Rector of the University Politehnica of Bucharest, Mihnea Costoiu declared the new University Year 2017-2018 opened, in an enthusiast atmosphere. The Rector pointed out the value and the...
Year 3 Specialization Exchange
Important for Year 3 students who want to change their specialization selection. The four specializations (in Romanian) consist of a full group each (no more vacancies). However, we decided to allow specialization exchanges between two students who agree that...
FAE Rules for Modules Progression
The Faculty of Aerospace Engineering Council in the 14 May 2019 meeting decided the following: The repeal of FAE-1 and FAE-2 Rules (described below) and their replacement with the mandatory attendance at the exam of the students who want to progress at a discipline...
Dassault Systemès Catia for students
Dassault Systèmes Catia V5 Student Edition is offered to students for free! Use code CATIA4FREE17 at Dassault Systemès 3DS Academy until 11 November 2017. Also you may get ICEM Surf Student Edition in the same terms using code ICEMSURF-FREE17 Totodata, avem...
New Student IDs
Important! The Student IDs will be changed from the UY 2017-2018. All Year 2, 3, and 4 Bachelor Students and Year 2 Master, please submit your updated photos to the faculty office to get the new IDs.
Accommodation in Campus 2017
The Faculty of Aerospace Engineering students will be accommodated in Building P27 Regie Campus (including the 5th floor). The students already staying there over summer must check out between 11 and 15 September 2017. On 11 September, the Romanians from Everywhere...
Opening of the New University Year 2017-2018
Th new University Year 2017-2018 will be opened on 25 September 2017 in the Radu Voinea amphitheater starting with 10 am. At 2 pm, the Faculty of Aerospace Engineering organizes the opening meeting in Polizu, in the Virgiliu Constantinescu F024 amphitheater....
Fly Practice 2017
Flying practice in the Year II summer has been a tradition of this faculty since the beginning until the 90s. It matters a lot to an aviation engineer to take the stick in his / her own hand, to understand the difficulty of flying, to feel directly the emotion...
Resit Session Schedule September 2017
Resit Session in September 2017 will follow this schedule: Resit Session Schedule September 2017 Resit Session Schedule for EGD Master September 2017 Mind you, there will be no other reexamination session. All resits will end on 10 September 2017....
0 Comments