On 18 November 2017 in the Acad. Virgiliu Constantinescu amphitheater, professors and students of the Faculty of Aerospace Engineering met Eng. Pilot Gabriel Iancic, President of the IAR AMERICAN organization and Eng. Sorin Ploscaru, aircraft designer. IAR AMERICAN presented an ambitious project, highly significant for the Romanian aviation: redesigning and manufacturing of a IAR-80 aircraft to fly again. This aircraft represents the peak of the Romanian aeronautical industry in its peak era, before and during WWII. In the same time, the IAR-80 fighter plane is representative for the numerous air victories won by the Romanian Royal Air Force in the war during 1941-1944 against Russian (Soviet) airplanes in the Barbarossa Operation, against American bombers and fighters in the Tidal Wave Operation, and against the German Luftwaffe, defending the country after the Royal Coup of 23 August 1944.
Gabriel Iancic is alumnus 1997 of the Faculty of Aerospace Engineering, specialization On Board Equipment and Installations. He lives in Canada since 2000 and is a frequent presence at the North American air shows, flying a number of sports aircraft, experimental, historic, both replicas and original aircraft. He is passionate of both flying and the technical side. Even since he was still in Romania, he repaired and released for flight a Zlin Z-726 which had been damaged in an accident. This continued to fly within the Romanian Airclub, based at the Pitești Geamăna Aerodrome. During a visit to Romania, Gabriel Iancic met a number of experts in aviation history, engineers, technicians from the old generations, who were at IAR Brașov in the pre-WWII era, with pilots of the Romanian Royal Air Force who have actually flown the IAR-80. The photo taken in November 2017 shows Air Brigade General (Ret) Pilot Ion Dobran, air Ace with 10 war victories, together with Eng. Gabriel Iancic. The air hero who won respect equally from Russian, American, and German pilots approaches his Centenary Anniversary. The Faculty of Aerospace Engineering wishes him good health and strength to continue to inspire our young for high performance aviation.
Unfortunately, from the 460 IAR-80/81 units manufactured in 1940-1944, not a single one survived destruction. The replicas exposed at the Aviation Museum and Military Museum in Bucharest have a rather symbolic and artistic value, lacking technical accuracy. Otherwise, most plans, drawings and original manufacturing documentation were lost. There is a possibility that an IAR-80 unit still exists, sunk in the Black Sea, in the Odessa region, but such a search and recovery operation could be extremely expensive.
The IAR-80/81 plane was designed by Prof. Dr. Eng. Ion Grosu, who was equally a graduate and a professor of the Faculty of Aerospace Engineering. The weaponry and manufacturing were done unde the command of Eng. Mircea Grossu-Viziru. The engine was designed and manufactured by Eng. Teodor Gârneț.
The IAR AMERICAN organization took the road of recovering as many original drawings as possible, manufacturing documentation, and targets the design of a new IAR-80, as close as possible to the original, but using current design technology and modern materials. Here, the students of the Faculty of Aerospace Engineering are expected to help. The young people showed their interest and understood the challenge. The students were encouraged by the the presence of professors Assoc. Prof. Dr. Eng. Octavian Thor Pleter, Lect. Dr. Eng. Grigore Cican, Lect. Dr. Eng. Mihai Barbelian, and Assoc. Assistant Eng. Arnau Cubillo.
Finally, the participants visited the Piston Engine Laboratory of the Faculty of Aerospace Engineering, where one of the few original IAR-80 engines, the 14-cylinder Double Star K14-IV C32 of 920 HP is maintained.
GKN Fokker Engineering Romania
GKN FOKKER ENGINEERING ROMÂNIA hires aerospace engineers. In 2016 we signed a strategic partnership with this prestigious company, which has over ten years of activity in Romania, with many accomplishments in latest generation aircraft design, employing our...
President Klaus Iohannis at the University Politehnica of Bucharest
On 4 October 2018 in the New Aula of the University Politehnica of Bucharest, we celebrated 200 years since Gheorghe Lazar founded the first higher technical school in Wallachia, The Academic School for Philosophy and Mathematics Sciences at the Monastery St....
CATIA Lab
Catia Lab is the laboratory by which UPB - Aerospace Engineering Faculty and ALTEN Delivery Center Bucharest (GECI Engineering Services) lay the foundations of the next generation of aircraft design engineers. We invite all interested students wishing to learn more...
Opening of the New University Year 2018-2019
The new University Year 2018-2019 will be opened on 24 September 2018 in the Aula of the University Politehnica of Bucharest, starting at 10 am. <Position of seats attributed to each faculty> At 2 pm, the Faculty of Aerospace Engineering organizes the...
Dean’s Office Summer Schedule
Special schedule of the Dean's Office during vacation (20 July - 26 August 2018): Wednesdays 25 Jul, 1 Aug, 8 Aug, 15 Aug, 22 Aug (12 - 2 pm) Monday 30 Jul (12 - 2 pm) For Undergraduate Admissions - Session to fill the vacancies, the schedule of the Local...
Nicolae Tipei Award 2018
For the 2018 Edition, the rules of the prestigious “Nicolae Tipei” Award have been improved. The financial reward grew from $750 to $1500 (USD), following the decision of Professor Sever Tipei, who is generously sponsoring this award together with INCAS. The main...
GURUCAD Openings
GURUCAD SRL company is recruiting qualified personnel for the company projects, engineers who are able to work 8 hours daily, 5 days a week. Therefore, BAe graduates who wish to continue their studies do not fit to this description. The company is also...
FAE-AEROSTAR Event June 2018
S.C. AEROSTAR S.A. BACĂU, AERONAUTICAL INDUSTRY GROUP involved in designing, construction, maintenance and modernization of civil and military aircraft, intend to hire at least 20 UPB-FAE aviation engineers in the course of the year 2018. For this purpose, the UPB-FAE...
2018 Graduation Ceremony
The graduation ceremony of the 2018 ”Gheorghe Lazăr” series of the University Politehnica of Bucharest will be organized on Saturday, 7 July, starting at 10 am at the ROMEXPO Central Pavilion. The program will include the presentation of the personality of Gheorghe...
Student Awards 2018
The Faculty of Aerospace Engineering organized four Sections of Students Scientific Conferences on 11 May 2018. In each Section, the Conference Board selected 4 papers which got awards: 1st Prize (400 lei), 2nd Prize (300 lei), 3rd Prize (200 lei) and Mention...
0 Comments